10 Jun Smoothing and painting of wall tiles
Sometimes, when renovating rooms with tiling, we can opt for the direct smoothing and painting of the walls, in order to carry out the work more quickly.
Prior analysis
To regularise a wall made of tiles, we have to take into account the following premises:
- Stability of the facing
- Adhesion on an enamelled surface
Technical considerations
Prior to application, the surface must be cleaned to remove any dirt or grease and remove the surface shine with diluted GECOL Desincrustante and rinse with water.
Then apply a layer of up to 5 mm of GECOL Rasoplast and smooth the surface.
Once dry, apply a finishing coat with one of the products from the GECOL Cril or GECOL Revestcril range.
Recommended products
Regulariser
Plastic coatings
Additives
Warnings: The data provided in this Construction Solution have been elaborated on the basis of the usual construction site processes. However, we recommend that for any particular circumstance you consult our Technical Department. info@gecol.com